100L Fuel Tank Mounting Bracket Set for Skyline Hakosuka GT-R

$ 179.00

Product Information: Part Number: #11-NS206 Make/model: Skyline Hakosuka GT-R Description: 100L Gas tank mounting bracket set For Skyline Hakosuka GT-R If you have the GT or GT-X, you can install the GT-R type 100L Gas Tank using these brackets. Stainless steel construction Takes approximately 3-4...

View product

71B Transmission Aluminum Shift Bushings for Datsun Z / Nissan Skyline

$ 45.00

Product Information: Part Number: #21-NS203 Make/model: Skyline Hakosuka / Kenmeri / Datsun 240Z 260Z 280Z 280ZX NA   Descriptions: Aluminum shift bushings for 71B transmission Compatible with: Datsun 240Z / 260Z / 280Z / 280ZX (non-turbo) Skyline C10 Hakosuka /  C110...

View product

Accelerator Return Spring for Skyline Hakosuka GT

$ 45.00

Product Information: Part number:  #10-NS209 Make/model: Skyline Hakosuka Descriptions: This is an  accelerator return spring for Skyline Hakosuka GT Located above the accelerator pedal For GT-R and GT-X, #10-NS201 is available Takes approximately 3-4 weeks for delivery. *Special order item-No return and No...

View product

Accelerator Return Spring for Skyline Hakosuka GT-R / GT-X

$ 29.00

Product Information: Part number:  #10-NS201 Make/model: Skyline Hakosuka Descriptions: This is an accelerator return spring for Skyline Hakosuka GT-R and GT-X Equivalent to OEM part #18215-R1100 For GT, #10-NS209 is available Longer side should be hooked up to the bell housing...

View product

Air Filter Parts for S20 Engine Skyline Hakosuka GT-R / Kenmeri GT-R / Fairlady Z432

$ 8.00 +

Product Information: Part number: #10-NS216 Make/model: Skyline Hakosuka GT-R/ Kenmeri GT-R / Fairlady Z432 Descriptions: Correct reproductions Made in Japan #10-NS216 - $139 Air filter unit OEM # 16546-A0200 #10-NS217 - $49 Air filter gasket set OEM #16712-0204P #10-NS218 - $18...

View product

Axle Shaft Bolt / Nut / Washer for Datsun 240Z 260Z 280Z Skyline Hakosuka GC10 Genuine Nissan NOS

$ 4.75 +

Product Information: Part number: #32-J4107 32-J4108 Make/model:  32-J4107: $139 Axle shaft outer bolt, nut, and washer set for Datsun 240Z 260Z 280Z Skyline Hakosuka GC10 Genuine Nissan NOS Sold as a set shown in photos   32-J4108: $45 Axle shaft inner nut &...

View product

B-Type Transmission Shifter Pin for Vintage Datsun & Nissan Cars

$ 3.00 +

Product Information: Part number: #21-J4204 Make/model: Datsun 240Z / 260Z / 280Z / 280ZX / Skyline Hakosuka / Kenmeri / Laurel Descriptions: 21-J4105: $19 Shifter pin for 1972-78 Datsun 240Z / 260Z / 280Z / 280ZX / Skyline Hakosuka / Kenmeri...

View product

Battery Frame Skyline Hakosuka / Kenmeri / Laurel

$ 139.00 +

Product Information: Part Number: 12-NS216 and 12-NS217 Make/model: Skyline Hakosuka /Kenmeri / Laurel   Descriptions: Skyline Hakosuka / Kenmeri / Laurel battery frame  There are 2 types. 12-NS216: $139 19 cm type battery frame for Skyline Hakosuka / Kenmeri / Laurel battery...

View product

Brake Master Vacuum/Booster Clevis Pin Kit for Skyline Hakosuka

$ 79.00

Product Information: Part number: 24-NS204 Make/model: Skyline Hakosuka Descriptions: Clevis pin kit for Brake master vacuum/booster For Skyline Hakosuka Direct replacement *Does not use busing like original type We also have original type Clevis pin 40-NS311 by itself and bushing set...

View product

Bucket Seat Stopping Cable set for Skyline Hakosuka GT-R

$ 99.00

Product Information: Part number: 40-NS266  Make/model: Skyline Hakosuka GT-R Descriptions: Bucket seat stopping cable set for Skyline Hakosuka GT-R Exact reproduction Each bucket seat takes a set Limited production from Japan Takes approximately 3-4 weeks for delivery. *Special order item-No return and No...

View product

Center Console Retaining Spring set for Skyline Hakosuka

$ 45.00

Product Information: Part number: 40-NS203 Make/model: Skyline Hakosuka Descriptions: A pair of center console retaining springs For Skyline Hakosuka Takes approximately 3-4 weeks for delivery. *Special order item-No return and No refund. Free shipping for US main island / Estimated rate for...

View product

Clip for Emblem Sold individually All Datsun / Nissan in 1960's and 1970's

$ 18.00 +

 Product Information: Part number: #31-JE133 Make/model:  All Datsun / Nissan in 1960's and 1970's Descriptions: Washer for Engine Head bolt Datsun 240Z 260Z 280Z 5101968-73 1965-70 Roadster SP / SR L Engine Skyline / 610 210 Hakouska / Kenmeri / Laurel...

View product

Clip for Gas door Key Cylinder for Nissan Skyline Hakosuka

$ 15.00

Product Information: Part number: #30-J4139 Make/model: Nissan Skyline Hakosuka Descriptions: Clip for gas door key cylinder for Nissan Skyline Hakosuka Genuine Nissan NOS Please expect some shelf-wear, scratches, or imperfection on all NOS (New Old Stock) items. Free shipping for US main island...

View product

Clip for Window Crank Handle for Nissan Skyline C10 GC10 Hakosuka

$ 7.00 +

 Product Information: Part number: #40-NS235 Make/model:  Nissan Skyline C10 GC10 Hakosuka Descriptions: Clip for Window Crank Handle for Nissan Skyline C10 GC10 Hakosuka Sold individually Free shipping for US main island / Estimated rate for international shipping is $10Dear international customers:...

View product

Close-Ratio Gear Set for 71B 5-Speed Transmission by Kameari Engine Works

$ 45.00 +

Product Information: Part Number: 21-KAME-109  / 21-KAME-110 /  21-KAME-111 / 21-KAME-112 Make/model: Skyline Hakosuka Kenmeri R30 Fairlady Z Datsun 240Z Descriptions: 21-KAME-109 - $1599 71B (FS5W71B) A-type 5-speed transmission For naturally aspirated L20 engines Teeth: 32/21  1st 2.624 2nd 1.814 3rd 1.360...

View product

Clutch Master Cylinder Clevis Pin Kit for Skyline Hakosuka

$ 79.00

Product Information: Part number: 21-NS201 Make/model: Skyline Hakosuka Descriptions: Clevis Pin kit for Clutch Master Cylinder For Skyline Hakosuka Takes approximately 3-4 weeks for delivery. *Special order item-No return and No refund. Free shipping for US main island / Estimated rate for...

View product

Correct Screw Set for Front Grille & headlight Bezel for Nissan Skyline Hakosuka 1969-72

$ 35.00 +

Product Information: Part number: #32-NS202  / #32-NS206 Make/model: Skyline Hakosuka  Descriptions: #32-NS202 $35 Screw Set for Front Grille & Headlight Bezels for 1969 Skyline Hakosuka Comes in a set for complete grille and headlight bezel #32-NS206 $38 Screw Set for Front...

View product

Cowl Top Hardware set for Skyline Hakosuka

$ 29.00

Product Information: Part number: #32-NS205 Make/model: Skyline Hakosuka  Descriptions: Cowl top hardware set For Skyline Hakosuka Correct OEM style screws Takes approximately 3-4 weeks for delivery. *Special order item-No return and No refund. Free shipping for US main island / Estimated rate...

View product

Door Key Cylinder Retainer Clip for Datsun 240Z 260Z 280Z 510 B110 B210 B310 620 Skyline C10 GC10 GC110 Genuine Nissan NOS

$ 10.00 +

 Product Information: Part number: #30-J4142  Make/model:  Most Datsun in 70's Descriptions: Door Key cylinder retainer clip for Datsun 240Z 260Z 280Z 510 B110 B210 B310 620 Skyline C10 GC10 GC110 Sold individually Genuine Nissan NOS Please expect some shelf-wear, scratches, or...

View product

Door Panel Clip 10 piece set for Skyline Hakosuka 2d HT / Kenmeri / Laurel

$ 38.00

Product Information: Part number: #40-NS248 Make/model: Skyline Hakosuka 2D HT / Kenmeri / Laurel Descriptions: Door panel clip 10 piece set  Exact reproduction For Skyline Hakosuka 2d HT and Kenmeri / Laurel Please check your car for qty you need: EX:...

View product

Door Striker Screw set for Skyline Hakosuka 2door / 4door

$ 35.00

Product Information: Part number: #32-NS201 Make/model: Skyline Hakosuka Descriptions: This is a correct set of 6 door striker screws For Skyline Hakosuka 2 door or 4 door models. Please order 1 for 2 door model and order 2 for 4 door...

View product

Engine Block Plug-Bolt Set for Fairlady Z432 / Skyline Hakosuka GT-R / Skyline Kenmeri GT-R with S20 Engine

$ 99.00

Product Information: Part number: #10-J4254 Make/model: Skyline Hakosuka GT-R / Kenmeri GT-R / Fairlady Z432 Descriptions: Engine block plug-bolt set for Fairlady Z432 / Skyline Hakosuka GT-R / Skyline Kenmeri GT-R with S20 Engine Free shipping for US main island /...

View product

Engine Room Hardware set for Skyline Hakosuka

$ 79.00

Product Information: Part Number: #32-NS203 Make/model: Skyline Hakosuka Descriptions: Correct engine room hardware set For Skyline Hakosuka This set inludes:  Front fender bolts x16 Hood latch bolts x4 Hood prop bolts x4 Heater core bolts x4 Hood hinge bolts x2 Engine upper...

View product

Engine Slinger Hook for S20 Engine Skyline Hakosuka GT-R / Kenmeri GT-R / Fairlady Z432

$ 39.00 +

Product Information: Part number:  #10-J4235  10-J4236  10-J4237 Make/model: Fairlady Z432 / Skyline Hakosuka GT-R / Kenmeri GT-R  Descriptions: 10-J4235: $39 Engine slinger hook Exhaust side For S20 Engine Skyline Hakosuka GT-R / Kenmeri GT-R / Fairlady Z432 OEM #10005-A0201 Sold individually...

View product

Exhaust Manifold Long Bolt for Datsun 280Z / 280ZX / Nissan Skyline

$ 6.00 +

Product Information: Part number: #32-J4104 Make/model: Datsun with L Engine Descriptions: Exhaust manifold long bolt Compatible with: Datsun 280Z / 280ZX Fuel-injected Skyline Kenmeri / Laurel / C210 / R30 Discount applied for bulk purchases Free shipping for US main island...

View product

Exhaust Manifold Long Stud for Datsun 280Z 280ZX Skyline Hakosuka Kenmeri Laurel C210 R30 Truck Roadster NOS

$ 8.50 +

 Product Information: Part number: #32-J4105 Make/model:  Descriptions: Exhaust manifold long stud for Datsun 280Z 280ZX Skyline Hakosuka Kenmeri Laurel C210 R30 Roadster TrucksSold individually Genuine Nissan NOS M8 1.25 Approximately 44.06mm in length If you have L6 Engine, you would need...

View product

Exhaust Manifold Stud for Datsun 240Z L24 / 260Z L26 L28 Genuine NIssan NOS

$ 8.00 +

 Product Information: Part number: #32-J4106 Make/model:  Descriptions: 32-J4105: M8 1.25 L: 47.06mm Exhaust manifold stud for L Engine (Datsun 240Z L24 / 260Z L26 / L28) Sold individually 6 per a L6 engine Genuine Nissan NOS 32-J4106: M8 1.25 L:43.16mm...

View product

Exhaust Manifold Yoke Stud for Datsun 240Z L24 / 260Z L26 NOS

$ 8.50 +

 Product Information: Part number: #32-J4105 Make/model:  Descriptions: Exhaust manifold yoke stud For Datsun 240Z L24 / 260Z L26  M8 1.25  Approximately 47.06 in length Sold individually Genuine Nissan NOS Please expect some shelf-wear, scratches, or imperfection on all NOS (New Old...

View product

Exterior Washer for Datsun / Nissan cars Genuine Nissan Sold individually

$ 6.00 +

Product Information: Part number: #32-J4113 Make/model: Vintage Datsun/Nissan cars Exterior Washer for Datsun / Nissan cars Genuine Nissan Sold individually NOS ID: Approximately 8mm OD: Approximately 21mm Bundle Pricing: The more washers are purchased, the better deal you will receive. Free shipping...

View product

Front Bumper Corner Brackets for Skyline Hakosuka

$ 69.00

Product Information: Part number: #30-NS205 Make/model: Skyline Hakosuka Descriptions: Front bumper corner braket set For Skyline Hakosuka. Takes approximately 3-4 weeks for delivery. *Special order item-No return and No refund. Free shipping for US main island / Estimated rate for international shipping...

View product

Front Door Hinge Bolt set for Skyline Hakosuka 2 door or 4 door

$ 89.00 +

Product Information: Part number: #32-NS220  / #32-NS221 Make/model: Skyline Hakosuka  Descriptions: #32-NS220 $99 Front Door hinge bolt set For Skyline Hakosuka 2 door /4 door  #32-NS221 $89  Rear Door hinge bolt set For Skyline Hakosuka 4 door  Correct OEM style bolts Takes approximately 3-4...

View product

Front Rocker Molding Clip set for Skyline Hakosuka

$ 79.00

Product Information: Part number: #30-NS232 Make/model: Skyline Hakosuka  Descriptions: Front rocker molding clip set For Skyline Hakosuka Comes in a set These clips hold the rocker panel molding at bottom rear of the front fender in place. Hand crafted in Japan Takes...

View product

Genuine Head Bolt Set for Nissan 280ZX Turbo / L6-Engine

$ 429.99

Product Information: Part number: #10-J8101 Make/model: Datsun 280ZX / All L engine Descriptions: Datsun 280ZX turbo head bolt set with washers Fits all L6 engines Genuine Nissan Free shipping for US main island / Estimated rate for international shipping is $38.Dear...

View product

Genuine Nissan Rod Bolt set for S20 Engine Fairlady Z432 / Skyline Hakosuka GT-R / Kenmeri GT-R

$ 365.00

Product Information: Part number:  #10-NS284 Make/model: Fairlady Z432 / Skyline Hakosuka GT-R / Kenmeri GT-R  Descriptions: Genuine Nissan rod bolt set For S20 Engine Fairlady Z432 / Skyline Hakosuka GT-R / Kenmeri GT-R Genuine Nissan Comes in a set of 12 ...

View product

Hood Lock Striker for Skyline Hakosuka

$ 49.00

Product Information: Part number: #30-NS207 Make/model: Skyline Hakosuka Descriptions: This is a reproduction hood lock striker For Skyline Hakosuka OEM part #65674-28500 Takes approximately 3-4 weeks for delivery. *Special order item-No return and No refund. Free shipping for US main island /...

View product

Hood Release Cable Clamp for Skyline Hakosuka

$ 45.00

Product Information: Part number: #30-NS208 Make/model: Skyline Hakosuka Descriptions: This is a reproduction hood cable clamp For Skyline Hakosuka Takes approximately 3-4 weeks for delivery. *Special order item-No return and No refund. Free shipping for US main island / Estimated rate for...

View product

Induction Box Bolt for S20 engine on Skyline Hakosuka GT-R / Kenmeri GT-R / Fairlady Z432

$ 59.00

Product Information: Part number: #10-J4220  10-J4221 Make/model: Skyline Hakosuka GT-R / Kenmeri GT-R / Fairlady Z432 Descriptions: 10-J4220: $59 Induction box bolt For S20 engine Fairlady Z432 Sold individually 10-J4221: $49 Induction box bolt For S20 engine Skyline Hakosuka GT-R / Kenmeri...

View product

Induction Box Clamp for S20 Engine Fairlady Z432 / Skyline Hakosuka GT-R / Kenmeri GT-R

$ 25.00

Product Information: Part number: #10-J4222 Make/model: Skyline Hakosuka GT-R / Kenmeri GT-R / Fairlady Z432 Descriptions: 10-J4222: Induction box clamp For S20 engine Fairlady Z432 / Skyline Hakosuka GT-R / Kenmeri GT-R Sold individually We also have Induction box bolt for...

View product

Kameari Engine Works 159-Piece Hardware Set for S20 Cylinder Head

$ 359.00

Product Information: Part number:  #10-NS289 Make/model: Fairlady Z432 / Skyline Hakosuka GT-R / Kenmeri GT-R  Descriptions: Kameari Engine Works hardware 159 pc set for S20 head S20 Engine Fairlady Z432 / Skyline Hakosuka GT-R / Kenmeri GT-R This set comes in...

View product

Kameari Engine Works Cam Sprocket Bolt Lock Washer Set for S20 Engine Skyline Hakosuka GT-R / Kenmeri GT-R / Fairlady Z432

$ 29.00

Product Information: Part number:  #10-J4238 Make/model: Fairlady Z432 / Skyline Hakosuka GT-R / Kenmeri GT-R  Descriptions: Kameari Engine Works Cam sprocket bolt lock washer set For S20 Engine Skyline Hakosuka GT-R / Kenmeri GT-R / Fairlady Z432 Comes in a set...

View product

Kameari Engine Works Performance Head Side Stud 12-Piece Set for S20 Engine Fairlady Z432 / Skyline Hakosuka GT-R / Kenmeri GT-R

$ 299.99

Product Information: Part number:  #10-NS286 Make/model: Fairlady Z432 / Skyline Hakosuka GT-R / Kenmeri GT-R  Descriptions: Kameari Engine Works performance head side stud bolt 12 pc set For S20 Engine Fairlady Z432 / Skyline Hakosuka GT-R / Kenmeri GT-R Made by...

View product

Kameari Engine Works Performance Lightweight Flywheel for S20 Engine Fairlady Z432 / Skyline Hakosuka GT-R / Kenmeri GT-R

$ 99.00 +

Product Information: Part number:  #10-NS274 / #10-NS275 / #10-NS276 Make/model: Fairlady Z432 / Skyline Hakosuka GT-R / Kenmeri GT-R  Descriptions: 10-NS274: $595 Kameari Engine Works performance Super lightweight flywheel For S20 Engine Fairlady Z432 / Skyline Hakosuka GT-R / Kenmeri GT-R...

View product

M6 Bolt Set for Vintage Japanese Cars & Restoration OEM

$ 189.00

Product Information: Part number: #32-J4250 Make/model:  Descriptions: M6 bolt set for all vintage Japanese car restoration Correct chromate finish From Nissan / Toyota / Honda / Mazda OEM hardware supplier in Japan Set includes: M6x18 x50 M6x15 x50 M6x16 "Letter 7"...

View product

M8 Engine Hex Nut for Datsun 240Z 260Z 280Z Genuine Nissan Sold individually

$ 7.00 +

Product Information: Part number: #32-J4114 Make/model: Vintage Datsun/Nissan cars M8x1.25pt Engine Hex Nut for Datsun / Nissan cars Black zinc plating ID: Approximately 6mm Thickness: Approximately 6mm Genuine Nissan part Sold individually NOS Bundle Pricing: The more nuts are purchased, the better deal...

View product

Manifold and Engine Slinger Stud for Datsun 240Z L24 280Z Genuine Nissan

$ 8.00 +

 Product Information: Part number: #32-J4118 Make/model:  Descriptions:  Manifold and engine slinger stud For Datsun 240Z L24 L26 L29  Takes 2 per an engine Sold individually Genuine Nissan NOS M8 1.25 Approximately 45.07mm in length Accompanies items 32-J4106 and 32-J4105 for...

View product

Manifold and Engine Slinger Stud for Datsun 240Z L24 NOS

$ 8.00 +

 Product Information: Part number: #32-J4118 Make/model:  Descriptions:  Manifold and engine slinger stud For Datsun 240Z L24 L26 L29  Takes 2 per an engine Sold individually Genuine Nissan NOS M8 1.25 Approximately 45.07mm in length Accompanies items 32-J4106 and 32-J4105 for...

View product

MK63 Brake Caliper Fitting Set for Skyline Hakosuka / Kenmeri

$ 99.00

Product Information: Part number: #24-NS214 Make/model: Skyline Hakosuka Descriptions: MK63 brake caliper fitting / connecting bolt set for Skyline Hakosuka / Kenmeri Please check out #24-NS210 Brake kit and #24-NS212 pad set The last photo shows MK63 for identification purpose Takes approximately 3-4...

View product

Mounting Bolt Set for MK63 Brake caliper for Skyline Hakosuka / S30

$ 39.99

Product Information: Part number: #24-NS237 Make/model: Skyline Hakosuka / S30 Descriptions: Mounting Bolt Set for MK63 Brake caliper for Skyline Hakosuka / S30 Comes in a set of 4 Bolts for 1 car (2 front calipers) Takes approximately 3-4 weeks for delivery....

View product

Return Spring for Brake Pedal / Clutch Pedal for Skyline Hakosuka (Sold Individually)

$ 29.00

Product Information: Part number: #24-NS235 Make/model: Nissan Skyline Hakosuka Descriptions: Return spring for brake pedal / Clutch pedal for Skyline Hakosuka Fit brake pedal or clutch pedal  Sold individually Reproduction of 46585-A8200 Takes approximately 3-4 weeks for delivery. *Special order item-No return and...

View product

S20 Engine Transmission Connecting Bolt Set for Nissan Skyline Hakosuka GT-R / Kenmeri GT-R / Fairlady Z432

$ 99.99

Product Information: Part Number: #32-J4226 Make/model: Skyline Hakosuka GT-R Kenmeri GT-R / Fairlady Z432 Description: S20 Engine Transmission Connecting Bolt Set for Nissan Skyline Hakosuka GT-R / Kenmeri GT-R / Fairlady Z432 Reproduction of original hardware Made in Japan Takes approximately 3-4...

View product